Linksys WAP200
Wireless-G Access Point with Power Over Ethernet and Rangebooster Наличие:
есть на складе
Wireless-G Access Point with Power Over Ethernet and RangeBooster
High-Speed Wireless Access for Existing Networks!
RangeBooster technology is a compatible add-on to standard Wireless-G which increases your wireless network's range up to two times, and its throughput by up to 35%. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that "dead spots" in the wireless coverage area are reduced, too.
The Advanced security features makes this solution ideal for your Business. Advanced wireless security using Wi-Fi Protected Access™ (WPA2 Enterprise) with up to 256-bit encryption, and the new Wireless Security Monitoring functionality gives your business the visibility and protection it needs. Used when Linksys 200-Series Wireless Adapters are present, the Wireless Security Monitoring functionality alerts you of possible wireless intruders, vulnerabilities in the wireless deployment, and visibility into Denial of Service attacks.
The Linksys WAP200 Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.
Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications.
Additional features like Multiple BSSIDs, Wireless Roaming, Auto-channel selection, and Load Balancing, make this solution ideal for your Business.
Technical Specifications:
|
General |
|
Device Type |
Wireless access point |
|
Width |
8.7 in |
|
Depth |
6.7 in |
|
Height |
1.5 in |
|
Weight |
1.7 lbs |
|
Networking |
|
Form Factor |
External |
|
Connectivity Technology |
Wireless |
|
Data Transfer Rate |
54 Mbps |
|
Data Link Protocol |
IEEE 802.11b, IEEE 802.11g |
|
Spread Spectrum Method |
OFDM, DSSS |
|
Remote Management Protocol |
SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS |
|
Frequency Band |
2.4 GHz |
|
Features |
Auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), repeating mode, Syslog support, firmware upgradable, MIMO technology, LAN-to-LAN bridging, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), RangeBooster technology |
|
Encryption Algorithm |
128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise |
|
Authentication Method |
Basic Service Set Identifier (BSSID) |
|
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11e |
|
Antenna |
|
Antenna |
External detachable |
|
Antenna Qty |
2 |
|
Directivity |
Omni-directional |
|
Gain Level |
3 dBi |
|
Expansion / Connectivity |
|
Interfaces |
1 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45
1 x network - Radio-Ethernet |
|
Miscellaneous |
|
Cables Included |
1 x network cable |
|
Compliant Standards |
CE, ICES-003, FCC |
|
Power |
|
Power Over Ethernet (PoE) |
Yes |
|
Power Device |
Power adapter - external |
|
Software / System Requirements |
|
OS Provided |
Linux |
|
Environmental Parameters |
|
Min Operating Temperature |
14 °F |
|
Max Operating Temperature |
131 °F |
|
Humidity Range Operating |
10 - 90% |
Перейти в каталог
|
