DrayTek VigorSwitch P1090
8-Port 10/100/1000BaseT Power over Ethernet, Port 1-4 support 802.3at PoE+ (Up to 30W power), Support Loop Detection, Wire-speed Packet Filtering and Forwarding Rate, unmanagement, 130 Watts total PoE Power (15.4W/port).
The DrayTek VigorSwitch P1090 switch, an 8-port Gigabit switch offers full-power to all these ports with Power of Ethernet (PoE) capability. All PoE-enabled devices for the business usages, such as wireless access points (e.g. VigorAP series), IP phones (e.g. VigorPhone series) or IP Cameras can all rely on VigorSwitch P1090 switch for the power supply to ease the deployment difficulties.
With DrayTek VigorSwitch P1090 switch, you are free to position equipments wherever they should be and power to the unit with the data over the Ethernet cable, not being limited by the power outlet. You can remotely reboot the device without having to climb up to or go to the device - just remove its Ethernet cable from the switch end as adopting PoE.
All ports of VigorSwitch P1090 switch are auto-sensing that make each port only provides power as detecting the presence of an 802.3af/at PoE device. In other words, VigorSwitch P1090 switch saves power and prevents compatibility issues or possible damage/hazard.
In short, VigorSwitch P1090 can simultaneously deliver the stable power supply to all 8 ports without overload or power being reduced on any of it and is also well-engineered to be reliable and maintenance free. The VigorSwitch P1090 can be rack mounted or operated on a desk/shelf.
The PoE can let WLAN deployment be much convenient for some corners and floors. Hence, the VigorSwitch P1090 is ideal for deployment of VigorAP 810 and VigorAP 900 series at logistic warehouse, business offices at different floors, hospitalities, shopping malls and schools.
- IEEE 802.3 10Base-TX
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af (Port1~8 Support PoE power feeding)
- IEEE 802.3at (Port1~4 Support PoE+ power feeding)
Power over Ethernet
- Number of Ports: 8 PSE/Power over Ethernet Ports, Port 1-4 Support PoE+
- Buffer Memory: 128KB
- MAC Address: 8K
- Support Loop Detection
- Transmission Method: Store and Forward
- Wire-speed Packet Filtering and Forwarding Rate
- PoE Ports: 8 ports
- Power Budget: Max. 110 Watt (Up to 30Watt per port)
- Complies with IEEE 802.3af/at Power Over Ethernet Plus
- Feeding powered device up to 100m
- Per Unit: Power (Green)
- Per Port: Link/Act (Green)
- Loop Detection: Red
||8 x 10/100/1000M PoE ports
|Power of Ethernet
||Standard: 802.3at / 802.3af
PoE Ports: 8 ports
Power Budget: Max. 110 Watt (Up to 30Watt per port)
||Operating :0 to 40℃
Storage :-20 to 90℃
||100~240V/AC ; 50~60Hz
||10 to 90% RH (non-condensing)
||262 × 184 × 41 mm (L x W x H)
||150 Watts 8 (Max)
Перейти в каталог